Jabsco Impeller Kit - 6 Blade - Nitrile - 2" Diameter [6303-0003-P]

The Jabsco 6303-0003-P impeller kit features a 2-inch-diameter, six-blade nitrile impeller with a single-flat drive and plastic insert. Jabsco flexible impellers undergo rigorous quality processes for reliable, efficient, long-lasting performance.

Specifications

• Part number: 6303-0003-P
• Material: Nitrile
• Drive type: Single flat drive
• Number of blades: 6
• Impeller diameter: 2 inches
• Shaft width, as listed: 5/16 inch
• Shaft diameter, as listed: 7/8 inch
• Insert material: Plastic

Compatibility

The Jabsco flexible-impeller range can be fitted to many makes and models of bronze flexible-impeller pumps used for engine cooling, bilge, transfer, and general-purpose applications. Confirm that part 6303-0003-P matches your pump before ordering. The supplied dimensions label 5/16 inch as shaft width and 7/8 inch as shaft diameter; verify these measurements against your pump's requirements.

Maintenance and replacement

• Replace impellers at least annually, or sooner depending on engine duty. A correctly installed impeller may last several years, but preventive maintenance is recommended.
• Always carry spare impellers onboard for emergencies, particularly for the engine cooling system.
• To remove an impeller, remove the end-cover screws, then grip the impeller hub with a Jabsco Impeller Removal Tool or channel-lock pliers.
• Do not use screwdrivers: they can damage the pump-body face, cause leaks, and be dangerous in confined spaces.
• Always grease a new impeller to ease installation into the pump bore and protect it during initial priming.
• Replace the gasket and end cover after installing the impeller.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.