Xanigo Marine Mold & Mildew Stain Remover – 32 oz (XMRM32)

Remove stubborn mold and mildew stains from boat tops, vinyl cushions, chairs, and canopies with Xanigo Marine Mold & Mildew Stain Remover. This 32 oz spray-on formula can also be used on rubber fenders, fiberglass, caulk, tile, grout, shower stalls, sinks, and counters.

Directions for use

Apply to a cool surface out of direct sunlight. This is a harsh chemical intended for initial stain removal; follow with Xanigo Marine's Mold & Mildew Preventer for ongoing prevention.

1. Liberally apply the remover and let it sit for 60–90 seconds. Do not let it dry; apply additional remover as needed to keep the surface wet.
2. Agitate with a brush in a circular motion to help remove stains from surface pores, then rinse thoroughly with clean water.
3. After rinsing, spray Xanigo Marine's Waterless Wash onto the seats and work it in with a microfiber cloth to neutralize leftover remover that could dry out vinyl or affect stitching.
4. Apply Xanigo Marine's Mold & Mildew Preventer to a clean, dry surface and spread evenly with a microfiber cloth. Spread it; do not wipe it off.

Follow-up care

The separate Mold & Mildew Preventer provides up to 90 days of protection with one application and forms a covalent bond with the treated surface. It can be applied to marine surfaces including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, and other high-moisture areas, as well as patio furniture.

Between prevention applications, use Xanigo Marine's Waterless Wash to clean seats without harsh chemicals or water. Spray on, allow 15–20 seconds, and wipe off with a microfiber cloth. It removes sunscreen without affecting the preventer's protective layer and can also be used to quickly shine gel coat.

Specifications

• Model: XMRM32
• Bottle size: 32 oz
• Type: Mildew & Moisture
• Box dimensions: 4 inches H × 4 inches W × 10 inches L
• Shipping weight: 2.5 lbs
• UPC: 860007772788

Quick Guide (PDF)

Product videos